Sunday, November 20, 2016

My new eShop

UPDATED: 11/21/2016

I have NOT posted anything for several (6) months, my life has been in somewhat of turmoil (maybe, I am getting too old for this), but now, maybe things are starting to get back to normal.

Regardless, I have been thinking of many HomeBrew projects that I want to build and blog. But first I have to set up my eShop in this new (and better) location.

This is the beginnings of my new eShop setup:

My new eShop Bench
I just finished building the wooden shelves. My previous eShop shelves were about the same but fixed, these shelves are movable, and therefore this setup should be more effective for varying sized electronic equipment.

Adjacent to that,  is my current MS 10 WorkStation, Raspberry Pi, and Orange Pi set ups:

Computer Workstation
The three bottom screens are connected to the MS WorkStation, and the three uppers are for the PI's.

Note: and the refrigerator is only about 15 feet away, hihi.

Unfortunately, I have not started my Ham Station and Antenna System yet.

I have some small Ham Radio related PC boards out for manufacturing at OSH Park, if they works as expected, I may be blogging about those, soon.

UPDATE:

The day after installing my shelves and turning on the Oscope for the first time in a long while, the (calibration) trace is going bonkers, with a short bright spot at the beginning of the trace. Trace INTEN has little control.  DANG, now something else to repair.
-

1 comment:

  1. Great looking shelves.
    My Tek 475 is getting weird after sitting for a few months also. I had some 464's that the Florida weather seemed to kill too. Went through and cleaned all the connectors and replaced all the electrolytics and they worked fine. Test equipment seems to make the old 'use it or loose it' expression become true all too often.
    73,
    Bill

    ReplyDelete